Connecting Pa3Xle To A Master Keyboard; Connecting Pa3Xle To A Midi Accordion - Korg Pa3XLe User Manual

Professional arranger
Table of Contents

Advertisement

Connecting Pa3XLe to a Master keyboard

You can control Pa3XLe with a master keyboard or any other
MIDI keyboard. You only need to connect the MIDI OUT con-
nector of the master keyboard to the MIDI IN connector of
Pa3XLe. The master keyboard will become the integrated key-
board of the Pa3XLe if it transmits over the same channel pro-
grammed as Global in Pa3XLe.
If the master keyboard transmits over the Global channel of
Pa3XLe, the split point and the status of the SPLIT button in the
control panel will affect the notes received from the master key-
board.
Connections and settings
To connect the master keyboard to Pa3XLe follow this proce-
dure:
1.
Connect the MIDI OUT connector of the master keyboard
to the MIDI IN connector of the Pa3XLe.
Program the master keyboard to transmit over the Global
2.
channel of Pa3XLe (see "MIDI > MIDI In Channels" on
page 266).
For information on programming the master keyboard,
please see the master keyboard's own user manual.
Select the "Master Keyboard" MIDI Preset. You can do this
3.
by going to the "MIDI > General Controls" page of the
Global mode. Note that this MIDI Preset will be remain
unchanged even when the instrument enters standby.
Note: Settings may change when new Global data is loaded
from disk. To protect settings from loading, use the Global
Protect function (see "Global Protect" on page 260).
If needed, press one of the buttons in the MODE section to
4.
go to the desired operative mode.
MIDI OUT
MIDI IN
Connecting Pa3XLe to a Master keyboard

Connecting Pa3XLe to a MIDI accordion

There are various types of MIDI accordions, each one requiring
different MIDI settings. Pa3XLe is provided with a series of
"Accordion" MIDI Setups, each one suitable for a different MIDI
accordion (see page 264).
Connection and settings
To connect the accordion to the Pa3XLe follow this procedure:
Connect the MIDI OUT connector of the accordion to the
1.
MIDI IN connector of Pa3XLe.
2.
Select one of the available "Accordion" MIDI Preset param-
eter. You can do this by going to the "MIDI > General Con-
trols" page of the Global mode. Note that this MIDI Preset
will be remain unchanged even when the instrument enters
standby.
Note: Settings may change when new Global data is loaded
from disk. To protect settings from loading, use the Global
Protect function (see "Global Protect" on page 260).
If needed, press one of the buttons in the MODE section to
3.
go to the desired operative mode.
MIDI
317

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents