PLATINUM inverter H
Start Up
Note
36
Installation and operating manual: PLATINUM inverter H
Version 01/2012
Mat. No. 753 840-AA
8.1
Initial startup of inverter
Startup is not possible with insufficient power.
Â
Ensure that the power applied is >7 W
Caution
Lack of performance due to faulty or lacking
configuration!
 Explicitly configure inverters as master or slave
during startup.
Caution
 Activate AC circuit breaker.
 Set DC switch to 1.
Inverter shows installation menu and starts startup.
For information on the operation, see 9 Operation.
For every selection screen, press key
screen, and press key
to call up the selection
again to confirm the selection.
.
DC