PLATINUM inverter H
Maintenance
88
Installation and operating manual: PLATINUM inverter H
Version 01/2012
Mat. No. 753 840-AA
11
Maintenance
Danger to life due to electric shock!
Â
Have the inverter's top cover opened exclusively by
the PLATINUM service or service partners authorised
by DIEHL Controls.
Danger
Danger to life do to DC and AC high voltage!
Â
Wear insulating protective clothing and face
protection.
Â
Have any cleaning or maintenance works carried out
Danger
exclusively by trained personnel.
The qualified specialist personnel require a license
from the relevant energy suppliers.
Prior to every maintenance work or cleaning:
Â
Switch off the main power supply (fuse).
Â
Deactivate AC circuit breaker.
Â
Set DC circuit breaker to 0.
Â
Disconnect connections.
Â
De-energise AC side and secure it against switching
on.
Â
Condensers require up to 60 min to discharge. Do not
touch connectors (DC/AC) for at least 5 minutes after
switching off.
Â
Ensure that the DC cables are de-energised.
When mounting/dismounting in France:
Â
Use special tools for removing the connections.
In case of a PLATINUM inverter without DC switch:
Â
Disconnect in the following order:
1. Remove cable from terminal strip on AC side.
2. Pull DC plug.