Initial Startup Of Inverter - Platinum 4300 TL Installation And Operating Manual

PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
After changing parameters, the inverter shows the following screen:
6.1

Initial startup of inverter

Lack of function due to missing setting!
Adjust Phase Balancer settings within 4 hours after
startup of inverter (see 6.2 Phase Balancer).
Setting at a later time is no longer possible.
Caution
Reconfigure country code within four hours after
startup of inverter. Setting at a later time is no longer
possible.
Switch on the main power supply (fuse).
For inverters with DC disconnector:
Set switch knob to 1.
The inverter is supplied with power. Configuration through the
following dialogs.
Initial startup
Key
OK Start configuration process with this inverter.
Installation and operating manual: PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
Version 05/2010
Mat. No. 734 559-AB
Function
Start Up
27