Service Menu; Installation And User Guide Platinum® Inverter 7000 R3, 9000 R3, 11000 R3, 14000 R3, 16000 R3 - Platinum 7000 R3 Installation And User Manual

Menu

6.5 Service menu

6.5.1 Call up service menu
1. Call up the main menu with the ESC button.
2. Select the Settings menu with the / buttons and confirm with OK.
3. Hold both the  and  buttons down together for around three seconds.
The service menu is displayed and the Event list menu option is selected.
4. Select the menu required using the / buttons.
6.5.2 Overview of the service menu
Event list
Parameters
Initial op. date
Energy meter
New configuration
MPP mode
Grid support
Power reduction *
* This menu can only be changed for a period of 4 hours after initial
configuration.
6.5.3 Parameters service menu
In some supply areas, the values for supply voltage and frequency sometimes or
always differ from the factory settings. PLATINUM® inverters can be adapted to these
values. For more information, contact the PLATINUM® service.
The Parameters service menu shows the parameters set, the country code and the
valid guidelines. The parameters are structured in several levels, with the specific value
displayed on the lowest level.
Parameters can only be modified by certified persons with the
PLATINUM® service tool.
34
See section 8.2
See section 6.5.3
Show initial operation date
Show energy fed in since initial operation
See section 4.3
See section 6.5.4
See section 6.5.5
See section 6.5.6
Installation and user guide PLATINUM® Inverter 7000 R3, 9000 R3, 11000 R3, 14000 R3, 16000 R3