Platinum 2100 H Installation And Operating Manual page 15

Material damage due to excessive dust formation!
Â
Avoid excessive dust formation.
Â
Avoid dust formation with electrically conductive dust
particles.
Caution
Because of the potential noise emission, DIEHL Controls recommends
not installing the inverter in living spaces.
Mounting fixture
75 75
Fig. 1 Dimensions of mounting fixture (specifications in mm)
Install the mounting fixture as follows:
 Mark the mounting holes using the mounting fixture as a
template.
t Observe dimensions and distances.
t Observe a minimum distance of 30 cm between inverter and
floor.
t
If possible, mount wall bracket in such a way that the
inverter's display is at eye level.
 Drill the mounting holes and insert the screw anchors.
 Fasten the wall bracket with the screws.
Installation and operating manual: PLATINUM inverter H
Version 01/2012
Mat. No. 753 840-AA
PLATINUM inverter H
Mounting the inverter
Note
15