Platinum 2100 H Installation And Operating Manual page 26

PLATINUM inverter H
Connection of the inverter
Note
26 Installation and operating manual: PLATINUM inverter H
Version 01/2012
Mat. No. 753 840-AA
Terminator for CAN bus
1
Fig. 11 Jumper for terminator
(1) Jumper for terminator
 In all inverters in the network, position jumpers for terminators
according to the inverter's position in the network (see table).
The jumper is configured for a single inverter, not a network, at the
factory.
It is possible to network up to 50 inverters via the CAN bus.
Inverter
single inverter,
no network
more than one inverter,
inverter on first or last
position in network
more than one inverter,
inverter on any position in
network
Jumper setting
From the side From above
1 2
1 2
1 2
1 2
1 2
1 2