Scanlist Serial Control - FLIR A3 F series User Manual

1 Click Serial Remote. The screen below will be displayed.
T639353;a1
2 Select the Protocol for your serial control configuration. (Pelco-D Serial Remote
in this example). Select Device ID: 1 to see the Pelco-D advanced settings. (If you
selected Bosch Serial Remote in 2 above, you will select Device ID: 2 to see the
Bosch advanced settings.)
T639348;a1
3 Enter the parameters for your specific location.
4 Scroll down to see more advanced settings.
11.3.2.1

Scanlist Serial Control

1 Scroll down until you see the Advanced Settings section shown in the screen below.
Publ. No. T559743 Rev. a601 – ENGLISH (EN) – April 26, 2012
11 – Verifying camera operation (FLIR A3xx pt series)
33