Calibration certificate
■
Downloads brochure
■
FLIR Sensor Manager CD-ROM
■
Lens cap
■
Printed Getting Started Guide
■
Printed Important Information Guide
■
Service & training brochure
■
Small accessories kit
■
User documentation CD-ROM
■
FLIR Tools & Utilities CD-ROM
■
Registration card
■
The installer will need to supply the following items; the lengths are specific to the
installation.
Electrical wire, for system power
■
Camera grounding strap
■
Coaxial RG59U video cables (BNC connector at the camera end) for analog video
■
Shielded Category 6 Ethernet cable for control and streaming video over an IP
■
network; and also for software upgrades
Optional serial cable for serial communications
■
Miscellaneous electrical hardware, connectors, and tools
■
9.3
Location considerations
The camera will require connections for power, communications (IP Ethernet, and/or
RS232/RS422), and video (two video connections may be required for analog video
installations).
NOTE: Install all cameras with an easily accessible Ethernet connection to support future software upgrades.
Ensure that cable distances do not exceed the Referenced Standard specifications
and adhere to all local and Industry Standards, Codes, and Best Practices.
Publ. No. T559743 Rev. a601 – ENGLISH (EN) – April 26, 2012
9 – Installation (FLIR A3xx pt series)
21