Set The Date And Time; Serial Remote Menu - FLIR A3 F series User Manual

11 – Verifying camera operation (FLIR A3xx pt series)
T639356;a1
The following paragraphs show the pages for setting serial communication parameters
and setting a new IP address for a camera on a local area network.
11.3.1

Set the date and time

1 Click Server Status. The screen below will be displayed.
T639354;a1
2 Set the Timezone from the pull down menu. Click Set.
3 Set the Date Format from the pull down menu. Click Set.
4 Set the Date by typing in the dialog boxes. Click Set.
5 Set the Time by typing in the dialog boxes. Click Set.
11.3.2

Serial remote menu

The settings you make in this screen will become active when the software override
DIP switch is set to Off (the default) allowing software settings to control the camera.
NOTE: This menu is disabled by default. You need to enable it before changing any settings.
32
Publ. No. T559743 Rev. a601 – ENGLISH (EN) – April 26, 2012