Ptz Controls (Ptz Cameras Only); Ptz Control Panel; Scan - FLIR SyncroIP Series Software Manual

Web Configuration Interface
• Snapshot: Click to save a snapshot from the camera to your computer hard drive. To
configure the folder where snapshots are saved, see "Path" on page 14.
NOTE: Depending on your computer's security settings, you may need to run your browser as
administrator to save snapshots or manual recordings.
• Triple Snapshot: Save the next three frames from the camera as snapshots.
• Manual Record: Click to start manually recording live video to your computer hard drive.
Click again to stop recording. To configure the folder where manual recordings are saved, see
"Path" on page 14.
• Manual Focus (motorized lens cameras only): Click to display the AF Peak and AF Max
parameters for auto focus. The closer AF Peak and AF Max are, the better the focus effect is.
To configure auto focus, see "Zoom and Focus (Motorized Lens Cameras Only)" on page 11.
• Audio Output: Click to mute/un-mute audio coming from the camera (audio-enabled
cameras only; must have self-powered microphone connected to the camera).
• Intercom: Click to activate the intercom to the camera (audio-enabled cameras only; must
have amplifier or speakers connected to the camera.
• Help: Click to access the built-in help file.

PTZ Controls (PTZ Cameras Only)

From Live View, click

PTZ Control Panel

Scan

You can use the Scan function to have the camera move automatically between two points.
To configure scan function:
5
to open the PTZ control panel.
Click the arrows to move
the camera
Click middle button and
then click and drag on the
video to move the camera
Adjust the camera speed
Adjust the zoom
Adjust the focus
Adjust the iris