Loading Paper In The Multi Purpose Tray - Kyocera TASKalfa 2550ci Operation Manual

Loading Paper in the Multi Purpose Tray

The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m
2
plain paper (80 g/m ) lager than A4.
The multi purpose tray accepts paper sizes from A3 to A6-R and Hagaki and from Ledger to Statement-R, 8K,
16K and 16K-R. Be sure to use the multi purpose tray when you print on any special paper.
IMPORTANT: When using media types other than plain paper (such as recycled or colored paper), always
specify the media type and paper weight settings. (Refer to Specifying Paper Size and Media Type for the
Multi Purpose Tray (MP Tray Setting) on page 2-38, Media Type Setting on page 9-8.) If you are using a
paper weight of 106 g/m
The capacity of the multi purpose tray is as follows.
• A4 or smaller plain paper (80 g/m
• B4 or larger plain paper (80 g/m
• Hagaki: 20 sheets
• Labels: 10 Sheets
• Coated: 30 Sheets
• OHP film: 10 sheets
• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Youkei 4, Youkei 2: 5 sheets
• Heavy paper (129 to 256 g/m
NOTE:
When you load custom size paper, enter the paper size by referring to Specifying Paper Size and
Media Type for the Multi Purpose Tray (MP Tray Setting) on page 2-38.
When you use special paper such as transparencies or thick paper, select the media type by referring to
Specifying Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page 2-38.
2
or more, set the media type to Thick and set the weight of the paper you are using.
2
), recycled paper or color paper: 100 sheets
2
), recycled paper or color paper: 25 sheets
2
): 10 sheets
1
Open the Multi Purpose tray until it stops.
2
When loading paper sizes from A3 to B4 and
Ledger to Legal, extend the support tray section of
the multi purpose tray until the mark "Δ" is fully
appeared.
2-32
Preparation before Use
2
) or up to 25 sheets of