Job Separator - Kyocera TASKalfa 2550ci Operation Manual

Job Separator

Follow the steps below to clear paper jams in the job separator.
1
Pull up right cover 1 lever and open the right cover
1.
2
Open the fuser cover, and remove the jammed
paper.
If the paper tears, remove every loose scrap from
inside the machine.
CAUTION:
The fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.
3
If jammed paper is seen through the paper ejection
slot of the job separator, pull it toward your side to
remove it.
If the paper tears, remove every loose scrap from
inside the machine.
4
Push the fuser cover back in place, and close right
cover 1.
12-29
Troubleshooting
12