Kyocera TASKalfa 2550ci Operation Manual page 458

Symptom
Images are skewed.
Paper often jams.
Printouts have black
lines.
2 or more sheets are
overlaps when
ejected. (multi feed)
Checkpoints
Are the originals placed
correctly?
Is the paper loaded
correctly?
—
Is the paper loaded
correctly?
—
Is the paper of the supported
type? Is it in good condition?
Is the paper curled, folded or
wrinkled?
Are there any loose scraps or
jammed paper in the
machine?
Is the slit glass dirty?
—
—
Corrective Actions
When placing originals on the
platen, align them with the original
size indicator plates.
When placing originals in the
optional document processor, align
the original width guides securely
before placing the originals.
Check the position of the paper
width guides.
Perform center line adjustment.
For more information about how to
do so, contact your service
representative.
Load the paper correctly.
Turn the orientation 180 degrees
around in which the paper is
positioned.
Remove the paper, turn it over, and
reload it.
Replace the paper with new paper.
Remove any jammed paper.
Clean the slit glass.
Run [Laser Scanner Cleaning].
Load the paper correctly.
12-4
Troubleshooting
Reference
Page
2-42
2-42
2-29
—
2-29
2-32
xxxviii
2-29
2-32
2-29
2-29
12-18
11-11
9-74
2-28