Kyocera TASKalfa 2550ci Operation Manual page 172

The procedure for using Booklet copying is explained below.
Booklet
Off
1-sided
>>Booklet
2-sided
>>Booklet
Book
Original : A4
>>Booklet
Zoom : 100%
Paper : A4
Preview
Add Shortcut
Status
Copies
Original
Off
Binding
Left/Right
Cover
Binding
Top
Finishing
Binding
Left
Top Edge
Binding
on Top
Right
Original
Binding
Orientation
Top
Cancel
OK
12/12/2011 10:10
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Booklet].
4
Press [1-sided>>Booklet] to produce a booklet
from single-sided originals.
Press [2-sided>>Booklet] to produce a booklet
from two-sided originals.
Press [Book>>Booklet] to produce a booklet from
an open book original.
5
If you selected [2-sided>>Booklet] or
[Book>>Booklet], choose the binding orientation in
Finishing.
If you selected [1-sided>>Booklet], choose the
binding orientation in Finishing.
6
If you choose [1-sided>>Booklet],
[2-sided>>Booklet], or [Book>>Booklet] you can
add the cover. Press [Cover], select [Cover] and
press [OK].
7
Press [Original Orientation] to choose the
orientation of the originals, either [Top Edge on Top]
or [Top Edge on Left]. Then press [OK].
8
Press [OK].
9
Press the Start key. Copying begins.
NOTE:
When using the platen, be sure to place the
originals in page order.
If the originals are placed on the platen,
consecutively replace each original after pressing
the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
4-18
Copying Functions