Kyocera TASKalfa 2550ci Operation Manual page 460

Symptom
Skewed-color
printout.
Print on the back of
the sheet is visible on
the front.
Perform Tone Curve
Adjustment is
displayed.
The color toner is
empty.
The machine makes a
clicking sound before
starting to print or
after printing.
The previous image
remains and lightly
printed.
Irregular horizontal
lines appear in the
image.
Checkpoints
—
—
—
Over long periods of use, the
effects of the ambient
temperature and humidity
can cause color output hues
to vary slightly.
Do you want to continue
printing in black and white?
—
—
—
—
Corrective Actions
Run [Calibration].
Run [Color Registration].
Set [Prevent Bleed-through] to
[On].
Run [Tone Curve Adjustment].
If the black toner is remained, the
machine continues printing in black
and white by selecting [Print in
Black and White] of Color Toner
Empty Action.
The machine is adjusting itself. It is
not a machine failure.
Run [Drum Refresh].
Contact your service
representative.
Contact your service
representative.
12-6
Troubleshooting
Reference
Page
9-73
9-70
4-40
6-24
9-22
9-73
9-16
—
9-68
—
—