Kyocera TASKalfa 2550ci Operation Manual page 425

Simple Login Settings
Simple login makes it possible to log in by simply selecting a user. The user must be previously registered.
NOTE:
For user registration, refer to Adding a User (Local User List) on page 10-5.
To use Simple Login, User Login Administration must be enabled in User Login on page 10-2.
If the guest authentication setting is enabled, Simple login cannot be enabled.
Simple Login
Select whether or not simple login is enabled.
Use the procedure below.
User Login/Job Accounting - Simple Login
Use the Simple Login.
Off
Status
Simple Login Key
Register a user for simple login. You can add Up to 20 users.
Use the procedure below.
On
Cancel OK
12/12/2011 10:10
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If the user authentication screen appears, enter
your login user name and password and then press
[Login]. For this, you need to login with
administrator privileges. The login user name and
login password are both set to "2500" in the factory
default state.
4
Press [Next] of User Login Setting, [Next] of Simple
Login Settings, and then [Change] of Simple Login.
5
Select [On] or [Off].
6
Press [OK].
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If the user authentication screen appears, enter your
login user name and password and then press
[Login]. For this, you need to login with administrator
privileges. The login user name and login password
are both set to "2500" in the factory default state.
10-17
Management
10