Kyocera TASKalfa 2550ci Operation Manual page 328

4
Press [Stamp Method] and set the stamp method for the text stamp.
The following settings can be selected.
Item
Each Print Page
Each Original Page
5
Press [Position] and set the position of the printed text stamp.
Positions that can be selected are [Top Left], [Top Middle], [Top Right], [Middle Left], [Center], [Middle Right],
[Bottom Left], [Bottom Middle], and [Bottom Right].
6
Press [Font] and set font and display settings for the printed text stamp.
The following settings can be selected.
Item
Size
Style
Font
Color
Density
Display Pattern
7
Press [OK].
Bates Stamp
Select whether or not to set a Bates Stamp.
Use the procedure below to set a Bates Stamp.
1
Press the System Menu key.
2
Press [Common Settings] > [
Stamp.
3
Select [Off] or [On].
4
Press [OK].
NOTE:
When [On] is selected, the Bates Stamp settings cannot be changed when printing.
Stamp on each printed page.
Stamp each page of the document.
Set the font size of the printed text stamp.
Set the font style of the printed text stamp. [Bold] or [Italic] can be
set.
Set the font of the printed text stamp. [Courier] or [Letter Gothic] can
be set.
Set the color of the printed text stamp. [Black], [Cyan], [Magenta],
[Yellow], [Red], [Green], or [Blue] can be set.
Set the density of the color of the printed text stamp.
Set the display method of the printed text stamp. [Transparent],
[Clipping], or [Overwrite] can be selected.
] > [Next] in System Stamp > [Next] in Printing Jobs > [Change] in Bates
9-32
Default Setting (System Menu)
Description
Description