Kyocera TASKalfa 2550ci Operation Manual page 464

Message
Cannot process this
job.*
Cannot staple at the
specified position.
Cannot staple this
paper.*
Cannot use ##### due
to a failure.
Check the document
processor.
Check the paper in
the multi purpose
tray.
Check waste toner
box.
Cleaning the laser
scanner...
Error occurred at
cassette #.
Failed to specify Job
Accounting.*
Failed to store job
retention data.
Finisher tray is full of
paper.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
—
—
Have you selected a
position that cannot be
stapled?
Did you select a paper size/
type that cannot be stapled?
—
Is the document processor
open?
Is the top cover of the
document processor open?
—
—
Is the waste toner box full?
—
—
—
—
Is the acceptable storage
capacity exceeded for the
document finisher tray?
Corrective Actions
Restricted by Authorization settings.
The job is canceled. Press [End].
Restricted by Job Accounting.
The job is canceled. Press [End].
If the selected paper is not changed
and [Continue] is pressed, staple is
released.
Select the available paper. Press
[Continue] to print.
If the selected paper is not changed
and [Continue] is pressed, staple is
released.
Select the available paper. Press
[Continue] to print.
Call service.
Close the document processor.
Close the document processor cover.
The paper size is different. Set
selected size paper and press
[Continue].
The waste toner box is not installed
correctly. Set it correctly.
Replace the waste toner box.
The machine is under the adjustment
to maintain its quality. Please wait.
Open the cassette. Check inside the
machine and remove the paper.
Failed to specify Job Accounting
when processing the job externally.
The job is canceled. Press [End].
The job is canceled. Press [End].
Remove paper from the document
finisher tray.
12-10
Troubleshooting
Reference
Page
—
10-20
—
—
—
—
—
2-32
11-6
11-6
—
—
—
—
—