Kyocera TASKalfa 2550ci Operation Manual page 387

Activating/Deactivating Application
To use an application, set the application to Activate.
Use the procedure below to start using an application.
1
Press the System Menu key.
2
Press [ ] and then [Application].
NOTE:
If the user authentication screen appears, enter your login user name and password and then press
[Login]. For this, you need to login with administrator privileges. The login user name and login password are
both set to "2500" in the factory default state.
3
Select the desired application and press [Activate].
You can view detailed information on the selected application by pressing [Detail].
NOTE:
To exit an application, press [Deactivate].
4
Enter the license key and press [Official].
Some applications do not require you to enter a license key. If the license key entry screen does not appear,
go to Step 5.
To use the application as a trial, press [Trial] without entering the license key.
5
When the confirmation screen appears, press [Yes].
CAUTION:
If you change the date/time while using an application, you will no longer be able to use the
application.
Launching Applications
You can launch any application for which Activate is set.
Use the procedure below to launch an application.
1
Press the Application key.
A list of available applications appears on the touch panel.
2
Press the key for the application to be launched.
The application starts up.
3
To exit the application, press [
4
When the application exit confirmation screen appears, press [Yes].
CAUTION:
The procedure for exiting some applications may differ.
✕
].
9-91
Default Setting (System Menu)
9