Protocol Template - TP-Link TL-SG3210 User Manual

Choose the menu VLAN → Protocol VLAN → Protocol Group to load the following page.
The following entries are displayed on this screen:
Protocol Group Config

Protocol:
VLAN ID:
Protocol Group Member

Select your desired port for Protocol VLAN Group.

6.3.3 Protocol Template

The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.
Choose the menu VLAN → Protocol VLAN → Protocol Template to load the following page.
Figure 6-9 Create Protocol VLAN
Select the defined protocol template.
Enter the ID number of the Protocol VLAN. This VLAN should be one
of the 802.1Q VLANs the ingress port belongs to.
Figure 6-10 Create and View Protocol Template
78