Static Lag - TP-Link TL-SG3210 User Manual

The following entries are displayed on this screen:
Global Config

Hash Algorithm:
LAG Table

Select:
Group Number:
Description:
Member:
Operation:
Click the Detail button for the detailed information of your selected LAG.

5.2.2 Static LAG

On this page, you can manually configure the LAG. The LACP feature is disabled for the member
ports of the manually added Static LAG.
Select the applied scope of Aggregate Arithmetic, which
results in choosing a port to transfer the packets.
• SRC MAC + DST MAC: When this option is selected,
the Aggregate Arithmetic will apply to the source and
destination MAC addresses of the packets.
• SRC IP + DST IP: When this option is selected, the
Aggregate Arithmetic will apply to the source and
destination IP addresses of the packets.
Select the desired LAG. It is multi-optional.
Displays the LAG number here.
Displays the description of LAG.
Displays the LAG member.
Allows you to view or modify the information for each LAG.
• Edit: Click to modify the settings of the LAG.
• Detail: Click to get the information of the LAG.
Figure 5-7 Detail Information
52