Snmp View - TP-Link TL-SG3210 User Manual

Note:
The amount of Engine ID characters must be even.

13.1.2 SNMP View

The OID (Object Identifier) of the SNMP packets is used to describe the managed objects of the
switch, and the MIB (Management Information Base) is the set of the OIDs. The SNMP View is
created for the SNMP management station to manage MIB objects.
Choose the menu SNMP→SNMP Config→SNMP View to load the following page.
The following entries are displayed on this screen:
View Config

View Name:
MIB Object ID:
View Type:
View Table

Select:
View Name:
View Type:
MIB Object ID:
Figure 13-4 SNMP View
Give a name to the View for identification. Each View can
include several entries with the same name.
Enter the Object Identifier (OID) for the entry of View.
Select the type for the view entry.
• Include: The view entry can be managed by the SNMP
management station.
• Exclude: The view entry cannot be managed by the SNMP
management station.
Select the desired entry to delete the corresponding view. All
the entries of a View will be deleted together.
Displays the name of the View entry.
Displays the type of the View entry.
Displays the OID of the View entry.
207