Radius Server - TP-Link TL-SG3210 User Manual

Port:
Status:
Guest VLAN:
Control Mode:
Control Type:
Authorized:
LAG:

12.4.3 Radius Server

RADIUS (Remote Authentication Dial-In User Service) server provides the authentication service
for the switch via the stored client information, such as the user name, password, etc, with the
purpose to control the authentication and accounting status of the clients. On this page, you can
configure the parameters of the authentication server.
Choose the menu Network Security→802.1X→Radius Server to load the following page.
Displays the port number.
Select Enable/Disable the 802.1X authentication feature for the
port.
Select Enable/Disable the Guest VLAN feature for the port.
Specify the Control Mode for the port.
• Auto: In this mode, the port will normally work only after
passing the 802.1X Authentication.
Force-Authorized: In this mode, the port can work normally
•
without passing the 802.1X Authentication.
• Force-Unauthorized: In this mode, the port is forbidden
working for its fixed unauthorized status.
Specify the Control Type for the port.
MAC Based: Any client connected to the port should pass the
•
802.1X Authentication for access.
• Port Based: All the clients connected to the port can access
the network on the condition that any one of the clients has
passed the 802.1X Authentication.
Displays the authentication status of the port.
Displays the LAG to which the port belongs to.
Figure 12-22 Radius Server
201