TP-Link TL-SG3210 User Manual page 157

Choose the menu QoS →Bandwidth Control →Storm Control to load the following page.
The following entries are displayed on this screen:
Storm Control Config

Port Select:
Select:
Port:
Broadcast Rate
(bps):
Multicast Rate
(bps):
UL-Frame Rate
(bps):
LAG:
Note:
If you enable storm control feature for the ingress rate limit-enabled port, ingress rate limit feature
will be disabled for this port.
Figure 9-11 Storm Control
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for Storm Control configuration. It is
multi-optional.
Displays the port number of the switch.
Select the bandwidth for receiving broadcast packets on the port.
The packet traffic exceeding the bandwidth will be discarded.
Select Disable to disable the storm control function for the port.
Select the bandwidth for receiving multicast packets on the port.
The packet traffic exceeding the bandwidth will be discarded.
Select Disable to disable the storm control function for the port.
Select the bandwidth for receiving UL-Frame on the port. The
packet traffic exceeding the bandwidth will be discarded. Select
Disable to disable the storm control function for the port.
Displays the LAG number which the port belongs to.
147