Ip-Range - TP-Link TL-SG3210 User Manual

The following entries are displayed on this screen:
Port Config

Port Select:
Select:
Port:
IGMP Snooping:
Fast Leave:
Filter:
Action Mode:
Bound IP-Range
(ID):
Max Groups:
LAG:
Note:
1. Fast Leave on the port is effective only when the host supports IGMPv2 or IGMPv3.
2. When both Fast Leave feature and Unknown Multicast Discard feature are enabled, the
leaving of a user connected to a port owning multi-user will result in the other users
intermitting the multicast business.
3. Multicast Filter feature can only have effect on the VLAN with IGMP Snooping enabled.
4. Multicast Filter feature has no effect on static multicast IP.
5. Up to 15 IP-Ranges can be bound to one port.

8.1.4 IP-Range

On this page you can figure the desired IP-ranges to be filtered.
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for IGMP Snooping feature configuration. It
is multi-optional.
Displays the port of the switch.
Select Enable/Disable IGMP Snooping for the desired port.
Select Enable/Disable Fast Leave feature for the desired port. If
Fast Leave is enabled for a port, the switch will immediately
remove this port from the multicast group upon receiving IGMP
leave messages.
Select Enable/Disable multicast filtering feature on the port.
Select the action mode to process multicast packets when the
multicast IP is in the filtering IP-range.
Permit: Only the multicast packets whose multicast IP is in the

IP-range will be processed.
Deny: Only the multicast packets whose multicast IP is not in

the IP-range will be processed.
Enter the IP-range ID the port will be bound to. The binding
IP-range IDs of the port can be cleared by entering null value in
this field and click Apply button to submit the configuration.
Specify the maximum number of multicast groups to prevent some
ports taking up too much bandwidth.
Displays the LAG number which the port belongs to.
119