Port Config - TP-Link TL-SG3210 User Manual

Link Type:
Egress Rule:
LAG:

6.1.2 Port Config

Before creating the 802.1Q VLAN, please acquaint yourself with all the devices connected to the
switch in order to configure the ports properly.
Choose the menu VLAN→ 802.1Q VLAN → Port Config to load the following page.
The following entries are displayed on this screen:
VLAN Port Config

Port Select:
Select:
Port:
Displays the Link Type of the port. It can be reset on Port Config
screen.
Select the Egress Rule for the VLAN port member. The default
egress rule is UNTAG.
• TAG: All packets forwarded by the port are tagged. The
packets contain VLAN information.
• UNTAG: Packets forwarded by the port are untagged.
Displays the LAG to which the port belongs.
Figure 6-5 802.1Q VLAN – Port Config
Click the Select button to quick-select the corresponding entry
based on the port number you entered.
Select the desired port for configuration. It is multi-optional.
Displays the port number.
71