Energy-Saving Functions - Toshiba e-STUDIO211c Operator's Manual

3. ENERGY-SAVING FUNCTIONS

1
The power switch of the copier automatically shuts off when the copier is not being used for a certain
period of time. The default setting is "OFF", however, the period of time until the switch is turned OFF is
selectable between 3 and 240 minutes on the "AUTO SHUTOFF" menu.
2 Setting the off-mode
3
This function allows the copier automatically to cut off the unnecessary electricity to the fuser unit when
the copier is not being used for a certain period of time and to stand by with the minimum power
consumption. The default setting is "OFF", however, the period of time until the copier goes into the
sleep mode is selectable between 3 and 240 minutes on the "AUTO SHUTOFF" menu.
4
Setting the off-mode
5
This function allows the copier automatically to lower the fuser unit temperature to stand by with the
minimum power consumption when the copier is not being used for a certain period of time. The default
setting is "OFF", however, the period of time until the copier goes into the energy-saving mode is
6
selectable between 3 and 60 minutes on the "ENERGY SAVE" menu.
Setting the energy save mode
ENERGY SAVER time < AUTO SHUTOFF time
7
The copier goes into the energy saving mode, then the off-mode or sleep mode.
ENERGY SAVER time
The setting of the off-mode or sleep mode takes precedence and the energy saving mode setting be-
comes invalid.
8
Power consumption and warm-up time at energy saving mode
9
Mode
10
Energy saving
mode
Normal standby
11
*1 With full options: Reversing automatic document feeder, automatic duplexer, finisher, large-capacity
- Power consumption and warm-up time are the actual measurements made according to Toshiba's
method of measuring.
12
- The initial (default) setting of the energy saving mode is Level 1. You can switch the level depending on the
user's environment. User selection
1-10
BEFORE MAKING COPIES
Off-mode (Base model)
Page 6-34
Sleep mode (When the copier is used also as a printer)
Page 6-34
Energy saving mode (When the copier is used also as a printer)
Page 6-33
AUTO SHUTOFF time
Power Consumption
Without
option
Level 1 Approx.100W
Level 2
Approx.160W
Approx.225W
feeder, hole punch unit, drawer modules
Power consumption: Average power per hour
Warm-up time
With full
*1
options
Approx.135W Approx. 2 min. 30 sec.
Approx. 1min. 15 sec.
Approx.195W
Approx.260W
Page 6-17
Efficiency
Without
option options
Approx. 56 %
Approx. 48 %
Approx. 29 % Approx. 25 %
0 %
0
With full
*1
0 %