Setting The Administrator Password - Toshiba e-STUDIO211c Operator's Manual

3. ABOUT THE SETTING BEFORE SCANNING (Cont.)

Setting the Administrator Password

The administrator sets the administrator password (5 digits). By this setting, the entry of the administrator
1
password becomes necessary for setting after pressing the ADMIN key. Only the administrator can
perform the setting with this key hereafter.
- The administrator password once set can be changed. In this case, the current administrator password
is needed.
2
- We recommend you to take a memo in order not to forget the administrator password.
Setting the New Administrator Password
3
1 Press the
panel, then press the SCAN SETTING key on the
4
touch panel.
2 Press the PASSWORD SETTING key.
5
6
7
3
Key in the new password (the same number in 5 digits)
in both 'NEW PASSWORD' area and 'VERIFY' area, then
press the SET key.
- The setting of the new administrator password is completed.
8
If the screen is not switched by pressing the SET key in this
9
step, the number in 'NEW PASSWORD' area is different from
the one in 'VERIFY' area. In this case, press the letter entry
section in the 'NEW PASSWORD' area (or 'VERIFY' area) to
make the letter entry available again.
10
11
12
8-30
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
PRINTER/NETWORK key on the control