3. ABOUT THE SETTING BEFORE SCANNING (Cont.)
Setting by the Administrator (Cont.)
6
Press the NEW key.
1
2
3
7
Set the template.
- Enter the file name as required, then press the
4
DESTINATION key to set the destination. Then press the
SETTING key to set the scanning condition. See steps 5
to 13 in page 8-4.
5
6
8
Press the SET key when the setting of the template is
completed.
7
8
9
Set the template name.
- Press the area
9
right to switch to the template name input screen.
10
11
12
8-24
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
as shown on the screen on the