Thin Paper/Thick Paper/Ohp Film/Special Paper/Sticker Label - Toshiba e-STUDIO211c Operator's Manual

Thin Paper/Thick Paper/OHP Film/Special Paper/Sticker Label

Thin Paper/Thick Paper/Special Paper/Sticker Label
Use the recommended thin paper/thick paper/special paper/sticker labels if possible. Copy paper sold
at stores is also acceptable, but paper of some brands may not be suitable to acquire a clear image. In
this case, ask your authorized Toshiba dealer.
1
Perform steps 1 to 2 on page 6-7.
2 Check the thickness of the paper and press the THIN ,
THICK1 , THICK2 , THICK3 or THICK4 key, and then
press the SET key. Press the SPECIAL key for spe-
cial paper or press the THICK2 key for a sticker label,
and then press the SET key.
3 Specify the paper size.
- Standard size paper
- Non-standard size paper
Select other copy modes as required.
4
Press the START key.
When the special paper is used, remove the copied paper
from the exit tray frequently.
Page 6-7 (step 4)
Page 6-9 (steps 2 to 3)
1
2
3
4
5
6
7
8
9
10
11
12
6-11