Table of Contents
Advertisement
5
Change the setting as required, then press the SET key.
- File format
Select a file format ( PDF , JPEG or TIFF ).
* When 'Scan to IFax' is also set, the file format is limited to
TIFF.
* When 'Scan to E-mail' and 'Scan to FTP' are set in combi-
nation, the file formats of both become the same. If either
of them changes in setting, the another one changes cor-
respondingly.
- Attachment/URL
ATTACHMENT: Select this to attach the scanned image data
to the E-mail message as an attachment and to send them.
URL: Select this to paste the URL into the body of a plain
text E-mail message without attaching the data to the E-mail
message. The receiver can download the scanned image data
from the printer controller (GA-1121/1131), referring to the
pasted URL to the data.
* If the size of the image data is over the limit setting size of
Fiery Setup for an attachment, it is necessary to paste the
URL into the body of E-mail message even though AT-
TACHMENT is selected here. See chapters 4 and 5 of
the Configuration Guide for more details about the set-
ting size of the attached image data.
Press the PREV key, then the screen goes back to the one
of step 3.
6
The preparation to send the E-mail to the set
address is completed.
- The E-MAIL key is highlighted.
- If you want to select more than one destination, press the
corresponding keys in destination continuously.
- When all settings of destination are completed, go back to
in step 9 in page 8-5.
How to set the 'IFax' after pressing the IFAX key is described in
step 8 in page 8-5.
Sending IFax
1
2
3
4
5
6
7
8
9
10
11
12
8-13
Advertisement
Table of Contents
