Setting Administrator Password - Toshiba e-STUDIO550 Operator's Manual

You can set or change the Administrator password. This password is used to log into the Administrator
page in the TopAccess and the Setting menu on the Touch Panel Display. There is no password when
the GA-1140 is installed on the copier. Therefore, it is recommended to set the administrator password
before you starting to set up the GA-1140.
1
Press the [PRINTER/NETWORK] key on the
Control Panel of the copier.
• The PRINT menu or PRINT/SCAN menu is displayed
on the Touch Panel Display.
2
Press the [ON/OFF] menu and press [OFF
LINE].
• The [SETTING] menu and [UTILITY] menu are
displayed next to the [ON/OFF] menu.
3
Press the [UTILITY] menu.
• The Utility menu is displayed.

Setting Administrator Password

115