Figure 1-35 Dimm Slot Identification - HP Rp3440-4 - 9000 - 0 MB RAM Installation Manual

Installing the System
Installing Additional Components
Figure 1-35 DIMM Slot Identification
Rear
Pair 6 (5A&5B)
Pair 4 (3A&3B)
Pair 2 (1A&1B)
Cell 1
1A
3A
5A
1B
3B
5B
Cell 0
2B
0B
0
2A
4B
4A
Pair 1 (0A&0B)
Quad 1 = Pair 1 & Pair 2
Pair 3 (2A &
Quad 2 = Pair 3 & Pair 4
Pair 5
Quad 3 = Pair 5 & Pair 6
Front
Installing System Memory
rp3410 Memory Configuration T
The HP 9000 rp3410 server supports DDR SDRAM DIMMs with ECC and chip spare protection. This server
has 12 DIMM slots and supports a maximum of six GB of total system memory. Memory usage in the server
varies with the model designation. In the original server (model A7136A), memory can be installed as one or
two pairs in the first quad (group of four). This allows memory configurations of two, four, eight, or twelve
DIMMs. In the current server (model A7136B), memory must be installed as quads (groups of four). This
allows memory configurations of four, eight, or twelve DIMMs. Thus, the HP 9000 rp3410 server must include
a minimum of 512 MB (model A7136A) or 1 GB (model A7136B) and can include up to six GB of memory in
combinations of 256 MB, 512 MB, and 1 GB DIMMs. Different size DIMMs can be installed in the server, but
all four DIMMs in a quad must be identical.
47
Chapter 1