Booting And Shutting Down Hp Openvms; Adding Hp Openvms To The Boot Options List - HP Integrity rx4640 User's & Service Manual
Hide thumbs
Also See for Integrity rx4640:
- Operation and maintenance manual (232 pages) ,
- Service manual (167 pages) ,
- Operation manual (90 pages)
Table of Contents
Advertisement
The command-line options you specify dictate the way in which HP-UX shuts down, and whether
the server is rebooted.
Use the following list to choose an HP-UX shutdown option for your server:
•
To shut down HP-UX and halt (power off) the server, issue the shutdown -h command.
To reboot a halted server you must power on the server using the PC command at the iLO MP
Command menu.
•
To shut down HP-UX and reboot the server, issue the shutdown -r command.
Booting and Shutting Down HP OpenVMS
This section has procedures for booting and shutting down HP OpenVMS on entry-class HP Integrity servers,
and procedures for adding HP OpenVMS to the boot options list.
•
To add an HP OpenVMS entry to the boot options list, see "Adding HP OpenVMS to the Boot Options
List" on page 149.
•
To boot HP OpenVMS on an entry-class HP Integrity server, see "Booting HP OpenVMS" on page 150.
•
To shut down HP OpenVMS, see "Shutting Down HP OpenVMS" on page 152.
Adding HP OpenVMS to the Boot Options List
On HP Integrity servers, you can use the following procedures to manage boot options list entries for HP
OpenVMS.
You can add the \efi\vms\vms_loader.efi loader to the boot options list from the EFI Shell or EFI Boot
Configuration menu (or in some versions of EFI, the Boot Option Maintenance Menu).
NOTE
On HP Integrity servers, the operating system installer automatically adds an entry to the boot
options list.
Adding an HP OpenVMS Boot Option
This procedure adds an HP OpenVMS item to the boot options list from the EFI Shell.
To add an HP OpenVMS boot option when logged in to OpenVMS, use the
@SYS$MANAGER:BOOT_OPTIONS.COM command.
Step 1. Access the EFI Shell environment.
Log in to the iLO MP and enter CO to access the system console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main EFI
menu). If you are at another EFI menu, choose the
to the screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, choose the
environment.
Appendix B
Booting and Shutting Down HP OpenVMS
option from the submenus until you return
Exit
menu option to access the EFI Shell
EFI Shell
Booting the Operating System
149
Advertisement
Table of Contents
Troubleshooting
