Chapter 7: Appendix - Hantek 1060 User Manual

Chapter 7: Appendix

Appendix A: Accessories
1) Probe×2 (1.5m), 1:1, (10:1) Passive Probes
2) A Power Adapter that fits the standard of destination country
3) A User's Guide
4) A User Registration Form
5) A User Warranty Card
Appendix B: Warranty
Hantek Co.,Ltd. warrants its products' mainframe and accessories in materials within the
warranty period. During the period concerned,
Hantek guarantees the free replacement or repair of products which are approved defec-
tive.
To get repair service or obtain a copy of the whole warranty statement, please contact
with your nearest sales and service office.
Hantek does not provide any other warranty items except the one being provided by this
summary and the warranty statement. The warranty items include but not being sub-
jected to the hinted guarantee items related to tradable characteristic and any particular
purpose.
Hantek will not take any responsibility in cases regarding to indirect, particular and ensu-
ing damage.
Appendix C: Maintenance
General Care
Do not store or leave the instrument in where the LCD display will be exposed to direct
sunlight for long periods of time.
CAUTION: To avoid damage to the instrument or probes, do not expose them to sprays,
liquids, or solvents.
Cleaning
If this instrument requires cleaning, disconnect it from all power sources and clean it with
a mild detergent and water. Make sure the instrument is completely dry before recon-
necting it to a power source.
To clean the exterior surface, perform the following steps:
1) Remove loose dust on the outside of the instrument and probes with a lint- free cloth.
Take care to avoid scratching the clear plastic display filter.
2) Use a soft cloth dampened with water to clean the instrument.
NOTICE: To avoid damage to the surface of the instrument or probes, do not use any
abrasive or chemical cleaning agents.
Storage of Scope meter
If the test tool is to be stored for a long time, it is required to charge the lithium battery
before storage.
Charging the scope meter
The lithium battery is possibly not charged when delivery. To make the battery with
enough electric quantity, it must be charged for 4 hours (the test tool must be turned off y
5