Save / Recall Waveforms And Setups - Hantek 1060 User Manual

In Single mode, after pressing the RUN/STOP key, the scope meter waits for trigger.
While the trigger occurs, the scope meter acquires one waveform then stop.

Save / Recall Waveforms and Setups

Save/Recall
Press the
The Save/Recall Menu Table
Menu
Wave
Setup
Type Bitmap
CSV
Factory
Internal
External
Wave
The Wave menu
The Wave menu table
Menu
Internal
External
Setup
The Setup menu
The Setup menu table
Menu
button, the interface menu for settings shows as follows.
Setting
Store or recall waveform.
Store or recall instrument setups.
Create or delete bit map files.
Create or delete CSV files.
Recall factory setups.
Go to menu for internal memory operation
Go to menu for external memory operation
Figure 2-34 The Wave menu
Setting
Go to menu for internal memoryoperation
Go to menu for external memoryoperation
Figure 2-35 The Setup menu
Setting
Description
Description
Description
2