Figure 4-5 Capacitance Measurement
Making a DC Voltage Measurement
To measure a DC voltage, do the following:
1. Press the V key and DC appears at the top of the screen.
2. Insert the black lead into the COM banana jack input and the red lead into the V/Ω/C
banana jack input.
3. Connect the red and black leads to the measured point and the measured point volt-
age value is displayed on the screen.
Making an AC Voltage Measurement
To measure the AC voltage, do the following:
1) Press the V key and DC appears at the screen.
2) Press the F1 key and AC appears at the screen.
3) Insert the black lead into the COM banana jack input and the red lead into the V/Ω/C
banana jack input.
4) Connect the red and black leads to the measured points and the AC voltage value of
measured points will be displayed on the screen.