Hantek 1060 User Manual page 52

Stop
output
Mask
2/2
Mask setting
Utility→Pass/Fail→Mask
Press
The Mask menu (Page 1/2)
The Mask menu (Page 2/2)
The Mask setting menu table (Page 1/2)
Menu Setting
Vertical
Horizontal
Create
Internal
Location
External
1/2
The Mask setting menu table (Page 2/2) When the save as internal memory
Menu Setting
2/2
Save
ON Stop test when output occur.
OFF Continue test when output occur.
Go to Mask menu
Back to the previous menu page
Setting to go to the following menu.
Figure 2-47 The Mask menu
Figure 2-48 The Mask menu
Set vertical clearance to the waveform(0.04div-4.00div)
Set horizontal clearance to the waveform (0.04div-4.00div)
Create a test mask according to the above clearance
Store created test mask into internal/External memory
Go to the next menu page
Back to the previous menu page
Store created test mask into internal memory.
Description
Description
50