Table of Contents
Advertisement
C11440-42U/C11440-42U01 Instruction manual_Ver.1.1
13. SPECIFICATIONS
13-1 CAMERA SPECIFICATIONS
(1) Electric specifications
Imaging device
Effective number of pixels
Cell size
Effective area
Full well capacity (typ.)
Readout speed
Readout noise (r.m.s)
Dynamic range *
Cooling method
Cooling temperature
Frame rate
Readout mode
Dark current
Exposure time
A/D bit
Linearity
Conversion factor
Dark offset
External trigger Function
External signal input
External trigger input level
External trigger output level
38
Scientific CMOS image sensor FL-400
2048 (H) × 2048 (V)
6.5 µm (H) × 6.5 µm (V)
13.312 mm (H) × 13.312 mm (V)
30 000 electrons
33 ms
10 ms (Rapid Rolling Mode)
1.5 electrons (typ.)
1.9 electrons (typ.) (Rapid Rolling Mode)
1
33 000 : 1
Peltier device + Forced air-cooled
+ 10 °C (Ambient temperature: + 10 °C to + 30 ºC)
at Full resolution
at 1024 lines
at center position
at 8 lines
at center position
at Horizontal 512 pixels at
8 lines at center position
Normal readout mode
Binning readout mode
Sub-array readout mode
0.6 electron/pixel/s (at Cooling temperature: + 10 °C)
Free running mode
Free running mode
/ Sub-array mode
External trigger mode
16 bit
Less than 3 %
0.46 electrons/count (typ.)
100 counts (at Normal readout)
Edge trigger / Global reset edge trigger
Level trigger / Global reset level trigger
Synchronous readout trigger
Start trigger
External input (SMA connector)
3.3 V LVCMOS level
3.3 V LVCMOS level
30 frame/s
60 frame/s
7696 frame/s
25 000 frame/s
(Rapid Rolling Mode)
1×1
2×2,4×4 (Digital binning) *
Configurable for each vertical 8
pixels and horizontal 512 pixels.
3 ms to 10 s
1 ms to 10 s (Rapid Rolling Mode)
129.99 µs to 10 s
40 µs to 10 s (Rapid Rolling Mode)
3 ms to 10 s
1 ms to 10 s (Rapid Rolling Mode)
2
Advertisement
Table of Contents
