Specifications; Camera Specifications - Hamamatsu Photonics C11440-22C Insctruction Manual

14. SPECIFICATIONS

14-1 CAMERA SPECIFICATIONS

(1) Electric specifications
Imaging device
Effective number of pixels
Cell size
Effective area
Full well capacity (typ.)
Readout noise (typ.)
Dynamic range *
Cooling method
Cooling temperature
Dark current (typ.)
Frame rate
A/D conversion
Readout mode
Exposure time
Digital interface
Lens mount
External trigger input level 3.3 V LVCMOS level
External trigger delay
function
External signal output
*
1 Calculated from the ratio of the full well capacity and the readout noise.
*
2 Digital binning processing in the camera.
Scientific CMOS image sensor FL-400
2048 × 2048
(H)
6.5 µm × 6.5 µm
(H)
13.312 mm
(H)
30 000 electrons
1.3 electrons
1
23 000 : 1
Peltier device + Forced air-cooled / Water-cooled
at Forced air-cooled: - 10 °C (Ambient temperature: + 20 ºC)
at Water-cooled: - 20 °C (water temperature: + 20 ºC)
at Water-cooled (max.): - 30 °C (water temperature: + 15 ºC)
at -10 °C: 0.5 electrons/pixel/s
at -20 °C: 0.15 electrons/pixel/s
at -30 °C: 0.05 electrons/pixel/s
at Full resolution
at 1024 lines
at center position
at 8 lines
at center position
16 bit
Binning readout *
Sub-array readout
Free running mode: 1 ms to 10 s
Free running mode (Sub-array): 38.96 µs to 10 s
External control mode: 1 ms to 10 s
CameraLink full configuration Deca mode
C-mount
0 µs to 10 s (10 µs steps)
Global exposure timing output
Trigger ready output
Programmable timing output 1
Programmable timing output 2
Programmable timing output 3
(Continuous High or Low output)
C11440-22C Instruction manual_Ver.1.4
(V)
(V)
× 13.312 mm
(V)
Free running mode
External control mode
Free running mode
External control mode
Free running mode
External control mode
2
(Digital binning): 2×2, 4×4
100 frame/s
90 frame/s
200 frame/s
164 frame/s
25 655 frame/s
877 frame/s
37