Table of Contents
Advertisement
AC adaptor
When unplugging the AC adaptor, always pull by the plug, not the cord.
Doing so can lead to fire or electric shock.
Remove the AC adaptor from the outlet when not using the camera for long
periods of time. Doing so can damage the cable and lead to fire or electric
shock.
Connecting and disconnecting cables
Always turn off the power supply of the peripheral device before
connecting and disconnecting cables.
Fixed the camera
When fitting the camera head to a tripod or other fixture, use the When
fitting the camera head to a tripod, for example, use the screw (1/4-20UNC)
in the center of a camera mount. Be careful that the fitting screw does not
enter more than 8 mm from the surface of the mount. Screwing it in
excessively can impair normal operation.
Lenses
Be careful not to screw the lens more than 7 mm onto the C-mount of the
camera head. Doing so can scratch the protective glass. (Some wide-angle
lenses in particular can have a thread of 7 mm or more.)
Shipping precautions
When transporting the camera by truck, ship, airplane, etc., wrap it
securely in packaging material or something similar.
Strong impact
Do not subject the camera to strong shocks by dropping it, for example.
Doing so can damage the camera.
Disposal
When disposing of the system, take appropriate measures in compliance
with applicable regulations regarding waste disposal and correctly
dispose of it yourself, or entrust disposal to a licensed industrial waste
disposal company. In any case, be sure to comply with the regulations in
your country, state, region or province to ensure the system is disposed of
legally and correctly.
Operating environment
This equipment is designed and tested for use in an industrial
environment.
If
(electro-magnetic interference) may occur. This equipment must not be
used in residential areas..
CAUTION
this
system
is
used
C11440-10C Ver.1.2
in
residential
areas,
EMI
3
Advertisement
Table of Contents
