Table of Contents
Advertisement
Introduction
Before using GigE Vision
All software products described in this manual pertain to the proper use of JAI GigE Vision
Product names mentioned in this manual are used only for the explanation of operation. Registered
trademarks or trademarks belong to their manufacturers.
To use the JAI SDK, it is necessary to accept the "Software license agreement" first.
This manual describes necessary equipment and the details of camera functions.
1
JAI GigE Vision
To understand and operate this JAI GigE Vision camera properly, JAI provides the following manuals.
User's manual (this booklet)
JAI SDK & Control Tool User Guide Describes functions and operation of the Control Tool
JAI SDK Getting Started Guide
User's manual is available at
2
Software installation
The JAI GigE Vision SDK & Control Tool can be downloaded from the JAI web site at www.jai.com.
The JAI SDK is available for Windows XP, Vista, and Windows 7, 32-bit and 64-bit.
For the details of software installation, please refer to the "Getting Started Guide" supplied on the
JAI SDK download page.
3
About GigE Vision Ver2.0
The GO-5000-PGE complies with the latest GigE Vision version 2.0. GigE Vision is the new standard
interface using Gigabit Ethernet for machine vision applications and it was mainly set up by AIA
(Automated Imaging Association) members. GigE Vision is capable of transmitting large amounts of
uncompressed image data through an inexpensive general purpose LAN cable for a long distance.
GigE Vision also supports the GenICam
Machine Vision Association). The purpose of the GenICam standard is to provide a common program
interface for various machine vision cameras. By using GenICam, cameras from different
manufactures can seamlessly connect in one platform.
For details about the GigE Vision standard, please visit the AIA web site,
www.machinevisiononline.org
GO-5000M-PGE / GO-5000C-PGE
®
camera
®
camera operation manuals
Describes functions and operation of the hardware
Describes the network interface
www.jai.com
TM
standard which is mainly set up by the EMVA (European
and for GenICam, the EMVA web site, www.genicam.org.
- 6 -
®
cameras.
Advertisement
Table of Contents
