II Morrow Inc. 50 User Manual page 69

Using Pressing the
Direct-To
position as the FROM location. When using the
Direct-To function, the FROM waypoint identifier is
overwritten with the word "Direct." If you remove the
Direct-To position with the Del? option, the old
FROM waypoint is returned to that position. If you
edit the FROM position, Direct-To navigation will be
replaced by the new entered waypoint.
Present
Position
FROM
WPT
Direct-To Defaults
When you press
shown will be the current TO waypoint in the Nav or
Flight Plan functions or the waypoint displayed in the
Database or Info functions.
Function
Nav
Database
Flight Plan
Info
You can always select a different Direct-To waypoint,
but the default is a useful starting point. While
viewing the default waypoint, press
then
ENTER
DIRECT-TO
TO
WPT
DIRECT-TO
DIRECT-TO Waypoint Default
Current TO waypoint
Displayed waypoint
Displayed leg TO waypoint
Displayed waypoint
to navigate directly to that waypoint.
Navigation Basics
key sets your present
Direct-To
Direct-To
Route
Waypoint
, the default waypoint
DIRECT-TO
and
3-31