II Morrow Inc. 50 User Manual page 6

Conventions
ENTER
NAV
MSG
Flashing field
GPS
ete SLE
1.006
Brg 126 123nm
MSG
Smart Key
Annunciator
iv
The knob is the smaller, inner knob of the two
SMALL
concentric rotary knobs used to look at or change
information on the display. When only the
is shown next to an example, turn the
The knob is the larger, outer knob of the two
LARGE
concentric rotary knobs used to look at or change
information on the display. The
shows both of the concentric knobs. Turn the
outer knob when this graphic is shown next to an
example.
Text in all caps and bold indicates the key to press.
A graphic key on the side of the page refers to the key
you should press for the given example. There are two
types of keys: hard keys and smart keys.
A "hard" key is a permanent key on the right side of
the front panel. The
"hard" key.
The "smart" keys are five small keys below the
display. The key label is shown above the key on the
display and may change depending on the function
you are using. Press the key below the label to access
the function.
Text in a display example with an underline indicates
the text will flash. In the example below, the field
labeled "01:23" is underlined to indicate that it is
flashing and ready for editing. The flashing characters
on the display are changed by turning the
knob. The GX55 is shown below as an example for
the control locations.
Hard Keys
01:23
"
DB FPL SYS
Smart Keys
SMALL
LARGE
key example shown here is a
NAV
Power
A
POLLO
GX55
NAV NRST INFO SEL
MAP D ENTER
Small, Inner Knob
knob
SMALL
knob.
knob graphic
,
LARGE
SMALL
Large, Outer
Knob
OFF-ON