II Morrow Inc. 50 User Manual page 54

Navigation Basics
Setting Hold Altitude and Buffer
The Hold Altitude is an altitude where you want to
remain. The Buffer is the tolerance or range in
altitude that you can move in vertically before a
warning message is generated.
1. In the Nav function, turn the
SEL
2. Turn the
3. Turn the
4. Press
ENTER
5. Pressing
ENTER
3-16
Hold Altitude
Buffer
Hold Alt/Buffer page. Press
Altitude value will flash.
Hold Alt 5650ft
Buffer 150 ft
ENT to Hold Alt
knob to change the value.
SMALL
knob to the Buffer value. Turn the
LARGE
knob to change the value.
SMALL
Hold Alt 4550ft
Buffer 150 ft
ENT to Hold Alt
to save the values. Press
ENTER
to activate the Hold Altitude.
Hold Rdy 4550ft
Buffer 100ft
ENT to Cancel
again will cancel the Hold
ENTER
Altitude.
Flight Path
knob to the
LARGE
. The Hold
SEL
again
ENTER