II Morrow Inc. 50 User Manual page 188

Message Function
DME Arc Sequence (GX50/60 Only)
This form of Sequence Alert is provided when the
next TO waypoint is the end of a DME Arc in a
nonprecision approach. Press
directly to the NAV mode DME Arc Assist page.
Auto OBS Crossing Holding Waypoint
When a waypoint on hold is crossed to the From side
the first time, the following message is provided. This
message is not created when you cross the MAP. If
you press
displayed. This message does not become an old
message after viewing.
User Database Memory Loss
This message indicates that one or more user
waypoints or user-defined comments had a checksum
error. This message is cleared after the message is
viewed.
Flight Plan Memory Loss
This message indicates that one or more flight plans
had a checksum error. This message is cleared after
the message is viewed.
8-12
Sequence Alert
DME Next-Use ARC
Assist? Enter
, the OBS Desired Track screen is
ENTER
Push ENTER to
set OBS Course;
NAV/MAP to Exit
User Database
Memory Loss:
2 Deleted
Flight Plan
Memory Loss
1 Deleted
to transition
ENTER