II Morrow Inc. 50 User Manual page 102

Moving Map Functions
3. Press
SEL
ENTER
4. Choose a waypoint using normal selection
ENTER
5. The Spacing option will flash. Turn the
6. Turn the
7. Press
ENTER
8. Note the diamond on the lower, right portion of the
4-24
. The Starting Waypoint field will flash
SEL
"INS?" (insert) or "CHG?" (change). Press
to start editing the Starting Waypoint selection.
Start: Ins?
Spacing :1.0
Direction :000·
methods. Then, press
knob to select the desired pattern spacing. You may
select between 0.2 and 9.9 nm.
Start:PFC
Spacing :1.0
Direction :000·
knob to the Direction of Travel
LARGE
option. Turn the
SMALL
Direction of Travel. You may select a direction
from 0 to 359.
Start:PFC
Spacing :1.5
Direction :000·
when selections are complete.
ENTER
screen. This indicates another available page. Turn
the knob one position to view the next setup
SMALL
page.
.
ENTER
arpt
knob to select the desired
arpt
ENTER
SMALL