II Morrow Inc. 50 User Manual page 215

4. Finally, when you are ready to exit the holding
WPT SEQ
pattern, press
OBS/HLD
While flying outbound, your CDI will
!
provide reverse sensing.
Holding at the FAF
Holding at the FAF is different from other holding
patterns. You must be inbound and have sequencing
enabled to allow proper transition to Approach Active
at the FAF.
This example shows holding at the FAF, SL
(TURNO) for the NDB or GPS Runway 31 Salem
(McNary) Airport (SLE).
RW31
(MAP)
WPT SEQ
Press
OBS/HLD
OBS/HLD
intercept the inbound course (point A). This will
allow you as much time as possible for transition to
Approach Active operation. The waypoint SL
(TURNO) becomes the FAF as soon as the hold is
released.
Approach Basics (GX50/60)
.
OBS/HLD
Caution
Salem
SLE
to release the hold as soon as you
SL
(FAF)
Point A
9-25