II Morrow Inc. 50 User Manual page 242

Approach Examples
3. Load the NDB approach to BOI. In flight plan
SEL
ENTER
ENTER
30 nm from Boise (BOI)
1. At 30 nm from your destination, the MSG
MSG
ENTER
2. Select the barometric pressure for the local
ENTER
Point A (Between PARMO IAF and BO FAF)
1. The Approach Active annunciator will flash at 3
2. Verify that the Approach Active annunciator lights
Point B (Nearing MAP)
Fly the final approach and descend to MDA.
Point C (Missed Approach)
1. When the decision has been made to execute the
WPT SEQ
OBS/HLD
9-52
mode active plan or Nav mode home page, press
. The display will flash "Load Approach?" Press
SEL
. Select "NDB 10R:PARMO" with the
ENTER
knob and press
SMALL
PARMO (IAF)
nBO (FAF & MAHP)
annunciator will light. Press
Approach" prompt, press
altimeter setting with the
.
ENTER
nm inbound. The CDI sensitivity begins to scale at
2 nm inbound.
at BO. Verify that the OBS/HLD annunciator is
lighted at BO.
published missed approach, press
active waypoint will become BO (Missed Approach
Hold Point). The CDI will gradually scale out to
1.0 nm full-scale deflection. The OBS/HLD
annunciator, after turning off briefly, will turn back
on as BO (now the Missed Approach Hold Point),
is an automatic holding waypoint.
.
ENTER
BOI APPR
NDB 10R
PARMO iaf
nBO faf
i
h
RW10R map
m
f
nBO mahp
Scale 47nm
RW10R (MAP)
. At the "Enable
MSG
.
ENTER
knob and press
SMALL
OBS/HLD
. The